CI-V interface: Difference between revisions

From Tučňák Wiki
Jump to navigation Jump to search
Ok1zia (talk | contribs)
No edit summary
Ok1zia (talk | contribs)
No edit summary
Line 1: Line 1:
Tested with: IC-706MKIIG, IC-7400
Tested with: IC-706MKIIG, IC-7400
=Photos=


=Schematics=
=Schematics=
[[Image:Usb2civs120.png|none|frame|Schematics of USB2CIV]]
I've used my favourite USB to serial converter FT232RL in recommended wiring. After many experiments I've found it is not possible to make interface without supply from radio. Radio provides voltage through high impedance. It can work statically but reach real communication speeds is impossible, rise edges are too slow. Supply can be about +5 to +12V . For my purpose best fits +8V from microphone connector (pin 1) next to the CI-V jack.
I've used my favourite USB to serial converter FT232RL in recommended wiring. After many experiments I've found it is not possible to make interface without supply from radio. Radio provides voltage through high impedance. It can work statically but reach real communication speeds is impossible, rise edges are too slow. Supply can be about +5 to +12V . For my purpose best fits +8V from microphone connector (pin 1) next to the CI-V jack.


=PCB=
=PCB=
 
<gallery>
=Photos=
Image:Usb2civb600.png|PCB of USB2CIV
Image:Usb2civoa.png|Parts side A
Image:Usb2civob.png|Parts side B
</gallery>

Revision as of 10:33, 21 November 2008

Tested with: IC-706MKIIG, IC-7400

Photos

Schematics

Schematics of USB2CIV

I've used my favourite USB to serial converter FT232RL in recommended wiring. After many experiments I've found it is not possible to make interface without supply from radio. Radio provides voltage through high impedance. It can work statically but reach real communication speeds is impossible, rise edges are too slow. Supply can be about +5 to +12V . For my purpose best fits +8V from microphone connector (pin 1) next to the CI-V jack.

PCB