CI-V interface

From Tučňák Wiki
Revision as of 16:40, 21 November 2008 by Ok1zia (talk | contribs) (→‎Photos)
Jump to navigation Jump to search

Tested with: IC-706MKIIG, IC-7400


Schematics

Schematics of USB2CIV

I've used my favourite USB to serial converter FT232RL in recommended wiring. After many experiments I've found it is not possible to make interface without supply from radio. Radio provides voltage through high impedance. It can work statically but reach real communication speeds is impossible, rise edges are too slow. Supply can be about +5 to +12V . For my purpose best fits +8V from microphone connector (pin 1) next to the CI-V jack.

PCB

Photos

On the pictures is version for IC-706MKIIG - supply is connected to microphone RJ-45, pin 1. Used box can be obtained here: http://krabicky.cz/viewproduct.php?=SID&productid=200