SSB CQ

From Tučňák Wiki
Jump to navigation Jump to search

After you select this item (Setup -> SSB CQ), Tucnak shows the list of all SSB messages (CQ 0 to CQ 7). Every line has the number of the message, the key which runs it, the character R if the message is repeated and the beginning of the file name. Select a message to edit it. When the mode is SSB (see Set mode), the same keys F5 to F12 run these messages (see Hotkeys and CW CQ).

SSB CQ

The message is a sound file which Tucnak plays. When you run it, Tucnak turns on PTT (through the keying device, see CW keying) and plays the file. Some keyers also switch the modulation input of the radio from the microphone to the sound card. When the file ends, Tucnak turns PTT off. You need the sound system from Audio and Tucnak compiled with the library libsndfile. On Android the file is played through Android.

The keys F9 and F10 (CQ 4 and CQ 5) open the menu. In the dialog of these two messages there is a check box Use F9 for CQ instead of the menu (or F10), the same as in CW CQ.

There are these items in the dialog for setting an SSB CQ:

Filename - the file which is played as the CQ. You can use macros f.e. /home/user/tucnak/cq/$MC_$O.wav to have multiple files for more callsigns and more operators, see CQ macros. Some audio output devices can have limitations to the audio format - sample rate, channels.

Repeat - the CQ will be repeated until you press ESC, TAB or another CQ key.

Delay [s] - the pause between the repeated messages (0 to 120 seconds, default 3). Tucnak counts it from the end of the file.

Breakable - the CQ is interrupted when the operator writes to the main input line.

SSB CQ with Hamlib

If you set the audio subsystem to Hamlib in Audio, Tucnak does not play a file. It starts the voice memory of the radio: CQ number n starts the memory n+1. Tucnak does not turn on PTT, the radio does it. The radio does not tell Tucnak when it has finished the message, so the repeated CQ is blind: the Delay is counted from the beginning of the message. It is the length of the message plus the pause, so set it longer than the message.